54 lines
1.6 KiB
Markdown
54 lines
1.6 KiB
Markdown
---
|
|
tags: [radio, ham-study]
|
|
---
|
|
|
|
**Feeder** is the cable that connects the transmitter/receiver to the antenna.
|
|
|
|
As the EM energy travels through the feeder, some energy is lost as heat.
|
|
|
|
- The longer the feeder, the greater the loss
|
|
- The higher the frequency being transmitted, the greater the loss
|
|
|
|
> This is why for VHF and UHF thicker, low-loss feeder is needed
|
|
|
|
## Types of feeder
|
|
|
|
The two types of feeder you need to know for the exam:
|
|
|
|
- coaxial
|
|
- twin feeder (a.k.a "ladder line")
|
|
|
|
|
|
|
|
### Coaxial cable
|
|
|
|
|
|
|
|
The inner conductor carries the signal. The screening keeps the signal within
|
|
the inner cable preventing loss.
|
|
|
|
It is **unbalanced** because the outer shield is at
|
|
[ground potential](./Ground.md) whereas the central conductor has a varying
|
|
voltage relative to ground.
|
|
|
|
### Twin feeder
|
|
|
|
|
|
|
|
Here we have two wires with spacers maintaining seperation. The two wires carry
|
|
equal and opposite signals.
|
|
|
|
Twin feeder is balanced because neither wire is grounded. Both have the same
|
|
impedence to ground in a symmetrical fashion. If wire A is at +5V, wire B will
|
|
be at -5V. Because of [alternating current](./Voltage_sources.md), they swap
|
|
over their potential difference at each cycle, making them effectively
|
|
interchangeable.
|
|
|
|
|
|
|
|
## Why balanced/unbalanced feeder matters
|
|
|
|
Some antennas are suited to unbalanced feeder whilst others are suited to
|
|
balanced feeder. If you want to use an unbalanced feeder with a balanced antenna
|
|
(or vice versa) you can do so, but this requires a Balun (balanced-to-unbalanced
|
|
transformer).
|