25 lines
1.3 KiB
Markdown
25 lines
1.3 KiB
Markdown
---
|
|
tags: [radio, ham-study]
|
|
---
|
|
|
|
Repeaters exist in order to extend the range of mobile stations. They are
|
|
designed to solve the line-of-sight problem associated with VHF/UHF, receiving
|
|
your signal and re-transmitting it at much higher power, extending the range of
|
|
low-powered portable devices.
|
|
|
|
Repeaters **have an input and output frequency** so that they can receive and
|
|
transmit at the same time. On VHF, repeaters typically transmit at 600KHz above
|
|
their input (receiver) frequency. The difference between the transmitting and
|
|
receiving frequency is known as the "offset".
|
|
|
|
In order that the repeater can distinguish intentional communication from noise,
|
|
it will use CTCSS tones. These are non-audible low-frequency tones that are
|
|
transmitted along with your audio. The repeater will only activate if it "hears"
|
|
the right tone. You have to program your radio to transmit the right CTCSS tone
|
|
for the specific repeater. In the UK there are 9 blocks of tones.
|
|
|
|
> It is important that you do not use the calling frequency of a repeater for
|
|
> normal two-way communication (simplex). This would prevent people from using
|
|
> the repeater. When you are agreeing on a shared frequency for CQ, ensure you
|
|
> are not accidentally using a repeater frequency. The repeater frequency (and
|
|
> its offsets) should only be used for repeater-relayed communication.
|