---
categories:
- Computer Architecture
- Electronics
- Hardware
tags: [logic-gates, binary]
---
# Logic gates
> [A logic gate consists in] three connections where there may or may not be some electricity. Two of those connections are places where electricity may be put into the device, and the third connection is a place where electricity may come out of the device.
[J.C. Scott. 2009. **But How Do It Know? The Basics of Computers for Everyone**, 21]
Logic gates are the basic building blocks of digital computing. **A logic gate is an electrical circuit that has one or more than one input and only one output.** The input and output points of the gate are [pins](/Electronics_and_Hardware/Digital_circuits/Integrated_circuits.md) The input controls the output and the logic determining which types of input (on/off) lead to specific outputs (on/off) is isomorphic with the truth-conditions of the [Boolean connectives](/Logic/Truth-functional_connectives.md) specifiable in terms of [truth tables](/Logic/Truth-tables.md).
Physically, what 'travels through' the gates is electrical current and what constitutes the 'gate' is a [transistor](/Electronics_and_Hardware/Digital_circuits/Transistors.md) responding to the current. Going up a level of abstraction, the current/ charge is identified with a [bit](/Electronics_and_Hardware/Binary/Binary_units_of_measurement.md#binary-units-of-measurement). It is bits that go into the gate and bits which come out: binary information that may be either 1 or 0.
## Elementary and composite gates
We distinguish elementary from composite logic gates. An elementary gate is a single gate embodying a single logical connective. It cannot be reduced any lower as a logical abstraction. A composite gate is a gate made up of more than one elementary gate and/or other composite gates.
An example of a composite gate would be a three-way AND. An AND with three inputs rather than the standard two that furnish the elementary AND gate. This gate would output 1 when all three gates have the value 1 and 0 otherwise. [Adders](/Electronics_and_Hardware/Digital_circuits/Half_adder_and_full_adder.md) and [latches](/Electronics_and_Hardware/Digital_circuits/Latches.md) whilst being [integrated circuits](/Electronics_and_Hardware/Digital_circuits/Integrated_circuits.md) are also, technically speaking, composite gates.
## Gate interface / gate implementation
The gate _interface_ is an abstraction that the enables the user to think of the gate simply in terms of inputs and outputs, without being concerned with the technical details of how this is achieved. How it is achieved is the gate _implementation_.
We can demonstrate this with the earlier example of a three-way AND. The diagram below represents the gate as an interface:
// TODO: Interface diagram
Whereas this diagram presents the implementation of the gate: it shows the specific combination of gates which creates the enables the behaviour represented in the interface diagram.
// TODO: Implementation diagram
> Importantly, a single interface may be implemented in a variety of ways. There is a one-to-many relationship at work here. From the point of view of the user interface these differences should not be detectable. This is another example of [hardware abstraction](/Computer_Architecture/Hardware_abstraction_and_modularity.md)
## NOT gate
> The NOT gate inverts the value of whatever input it receives
### Symbol
### Truth conditions
| $P$ | $\lnot P$ |
| --- | --------- |
| 1 | 0 |
| 0 | 1 |
### Interactive circuit
## AND gate
> The AND gate represents the truth conditions of the [conjunction](/Logic/Truth-functional_connectives.md#conjunction) truth functional connective
### Symbol
### Truth conditions
| $P$ | $Q$ | $P \land Q$ |
| --- | --- | ----------- |
| 1 | 1 | 1 |
| 1 | 0 | 0 |
| 0 | 0 | 0 |
| 0 | 0 | 0 |
### Interactive circuit
## NAND gate
> The NAND gate inverts the truth conditions of AND.
### Symbol
### Truth conditions
| $P$ | $Q$ | $\lnot(P \land Q)$ |
| --- | --- | ------------------ |
| 1 | 1 | 0 |
| 1 | 0 | 0 |
| 0 | 1 | 0 |
| 0 | 0 | 1 |
### Interactive circuit
NAND is a **universal logic gate**: equipped with just a NAND we can represent every other possible logical condition. In practice with circuits, it is more efficient to use specific dedicated gates (i.e OR, AND, NOT etc) for the other Boolean connectives but in principle the same output can be achieved through NANDs alone.
## OR gate
> The OR gate represents the truth conditions of the [disjunction](/Logic/Truth-functional_connectives.md#disjunction) truth functional connective
### Symbol
### Truth conditions
| $P$ | $Q$ | $P \lor Q$ |
| --- | --- | ---------- |
| 1 | 1 | 1 |
| 1 | 0 | 1 |
| 0 | 1 | 1 |
| 0 | 0 | 0 |
### Interactive circuit
## XOR gate
> The OR gate represents the truth conditions of the exclusive OR
### Symbol
### Truth conditions
| $P$ | $Q$ | $\lnot(P \Leftrightarrow Q)$ |
| --- | --- | ---------------------------- |
| 1 | 1 | 0 |
| 1 | 0 | 1 |
| 0 | 1 | 1 |
| 0 | 0 | 0 |
### Interactive circuit
## NOR gate
> The NOR gate inverts the function of an OR gate
### Symbol
### Truth conditions
| $P$ | $Q$ | $P \lor Q$ |
| --- | --- | ---------- |
| 1 | 1 | 0 |
| 1 | 0 | 0 |
| 0 | 1 | 0 |
| 0 | 0 | 1 |
### Interactive circuit