thomasabishop/eolas
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

update antenna notes

Browse source
This commit is contained in:
Thomas Bishop 2026-01-27 19:23:48 +00:00
parent bc71e76a86
commit 802df7c3f3
1 changed files with 75 additions and 4 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

79
zk/Antennas.md
View file

@ -17,9 +17,11 @@ There are five antenna that you need to know for the exam:
- the end-fed long wire - the end-fed long wire
- the Yagi (beam) antenna - the Yagi (beam) antenna
## The half wave dipole ## The half wave dipole antenna
![](../img/dipole-a.jpg) ![](../img/half-dipole-antenna.png)
Typically used by amateur operators.
Its total length is equal to half a wavelength. This informs the length it needs Its total length is equal to half a wavelength. This informs the length it needs
to be in order to pick up a certain frequency. to be in order to pick up a certain frequency.
@ -27,8 +29,77 @@ to be in order to pick up a certain frequency.
![](../img/dipole-b.jpg) ![](../img/dipole-b.jpg)
For example, if 15MHz has a wavelength of 20 meters, your dipole should be 10 For example, if 15MHz has a wavelength of 20 meters, your dipole should be 10
meters long ($\frac{20/2} = 10$). meters long (because 20/2 = 10).
The signal from a dipole radiates as follows: The signal from a dipole radiates as follows:
![](../img/dipole-radiation-pattern.gif) ![](../img/dipole-radiation-pattern.png)
## The quarter wave ground plane antenna
![](../img/quarter-wave-antenna.png)
This antenna is vertical and is omnidirectional, radiating the signal in all
directions.
It's length corresponds to 1/4 of a wavelength, hence used for VHF and UHF
bands.
The radials at the bottom form the ground plane that boosts the signal
horizontally in addition to the vertical reach of the main part of the antenna.
## The five-eighth wave ground plane antenna
![](../img/five-eighth-antenna.png)
This antenna is also vertical and omnidirectional and used for VHF and UHF
bands. It has a coil at the base in addition to the radials.
## End-fed long wire
The length is random compared to the other antennae. The length used determines
the wavelengths that can be picked up and it needs to be matched to a specific
frequency.
![](../img/end-fed-antenna.png)
The most important thing to remember about this antenna is that it is more
susceptible to EM interference than other types.
## Yagi antenna
In contrast to the others, the Yagi is directional and focused in one direction
- typically the direction of the station you are trying to pick up.
It basically works as a dipole with a reflector behind it. This helps to push
the waves in the horizontal direction of travel, assisted by the director spoke
in front.
### Gain and ERP
Antennas like the Yagi have **gain**. This means they can increase the power
that they receive from the transmitter via the [feeder](./Feeders.md).
Gain is measured in decibels:
| Antenna gain | Power muliplied by a factor of... |
| ------------ | --------------------------------- |
| 3dB | 2 |
| 6dB | 4 |
| 9dB | 8 |
| 10dB | 10 |
ERP is the **Effective Radiated Power**. This is the product of the power that
the antenna is receiving from the feeder and the gain level.
> ERP (Watts) = power feed x antenna gain
Some example calculations:
| Gain | Gain times | Power to antenna | ERP |
| ---- | ---------- | ---------------- | --------- |
| 3dB | x2 | 10 watts | 20 watts |
| 6dB | x4 | 10 watts | 40 watts |
| 9dB | x8 | 10 watts | 80 watts |
| 10dB | x10 | 10 watts | 100 watts |